华为 TN11PDU01 华为配电单元 机柜配电
华为TN11PDU01机房网络服务器机柜专用配电单元
产品简介
华为TN11PDU01配电单元适用于OSN丶PTN系列传输设备,PDU的A部分和B部分互为热备份。支持主、备共8路独立电源输入输出,输入电压范围为-38.4V~-57.6V或-48V~-72V直流电压。在PDU的电源输入区,根据机房供电设备提供的电流不同,配合短接铜排,可实现四种电源接入方式。
Determine the required power cables for connecting the PDF to the PDU against the following table. If the length and cross-sectional area of the power cable do not conform to the specifications listed in the following table, consult with the product manager at your local representative office.。
4根电源线中,上面的2根电源线为一对,下面的2根电源线为另一对,每对线分别对应一路电源。因此,与配电盒 对接时,请注意不要混插!
The voltage of the AC power is high, and therefore turn off the AC power before installing AC power cables to avoid an electronic shock. 交流电压高,安装交流电源线时必须先关闭交流供电,防止触电!
华为 TN11PDU01 华为配电单元 机柜配电
华为TN11PDU01机房网络服务器机柜专用配电单元
产品简介
华为TN11PDU01配电单元适用于OSN丶PTN系列传输设备,PDU的A部分和B部分互为热备份。支持主、备共8路独立电源输入输出,输入电压范围为-38.4V~-57.6V或-48V~-72V直流电压。在PDU的电源输入区,根据机房供电设备提供的电流不同,配合短接铜排,可实现四种电源接入方式。
Determine the required power cables for connecting the PDF to the PDU against the following table. If the length and cross-sectional area of the power cable do not conform to the specifications listed in the following table, consult with the product manager at your local representative office.。
4根电源线中,上面的2根电源线为一对,下面的2根电源线为另一对,每对线分别对应一路电源。因此,与配电盒 对接时,请注意不要混插!
The voltage of the AC power is high, and therefore turn off the AC power before installing AC power cables to avoid an electronic shock. 交流电压高,安装交流电源线时必须先关闭交流供电,防止触电!